Saturday, 21 May 2016

Caustic etching lino - an update




Through repeated trials and testing I've managed to fine tune some of my process 
since my previous post, so here is an update of some key points:

Etched lino shows an all-over texture after etching

Problem: Lino shows an all-over texture after etching - this texture could be used to your advantage but for what I had in mind, I don't always want it. 

Solution: sand the lino with wet and dry sandpaper (I used 400 grit). I noticed that some lino I have used etches smoothly while some etches leaving a background texture. I tested 2 pieces of lino - Silkcut and some from National Art Supplies. The NAS lino has a harder, more plasticky surface. 
Sand the surface to achieve an all-over even matte surface. This is easy and quick with Silkcut but it takes quite a bit of time and elbow grease with the other lino.


Sand the lino with wet and dry sandpaper
to form a slurry all over the surface.

Silkcut lino on the left after sanding, other lino on the right - you can
see it still has a bit of a sheen in patches so needs more sanding. 


Both lino samples are etching evenly and at the same rate.

Lino etches smoothly
Testing plates with relief inking, intaglio inking
and printing over monoprint backgrounds.

I cut away areas of the lino plates that had etched
with the strong texture to see what effects I might achieve.

Lino plate - etched and cut
by Toni Hartill

The main thing I am learning from this repetition of trial and error is that I am fine-tuning the process and materials to MY way of working, in fact I am learning WHAT my way of working is. I'm not one to take a set of guidelines or rules and to follow them precisely - I'll reinterpret them my own way - ask anyone who has tried to cook from one of my recipes - they are NEVER as they are first written.

You may find some of the steps don't work for you, 
or with your materials - there are so many variables in this printmaking lark that can make all your efforts go pear-shaped: is it the paper weight, the ink, the pressure of the press, the dampness of the paper, the position of venus, the pattern of my tea leaves!??? or is it just me?.....


So, my advice is, 
follow instructions only so far, 
then, through lots of your own trials 
make it work for you and your way of working.

And I'd love to hear and see what works for you 
if you'll share your successes in return. 

Happy experimenting!